
How to Remote Control LED Sign Power Switch in NovaLCT-Pluto
We usually want our LED Sign or LED Display turn on/off at a certain time, then it will be very hard to do it manually. Is there this kind of function in the software and how to practise this function?
NovaLCT-Pluto has this function to schedule the power of the LED Sign or LED Display Screen. Here i will teach you how to operate on the software, its quite easy so follow these steps:
1. Operation
The following is the main interface of power management.
figure 1 Power management interface for the card
1) Immediately Open/Close
Click【Read】to read the current status of relay. Click【Immediately Open】or【Immediately Close】 control the power of the screen by the relay in real time.
2) Timing Open/Close
Click add button "Add" . On the following interface, you can complete the settings like effective date, weekly effective days or effective time.Click【OK】when finished.
figure 2 Add the timing control of power
3) Send the information of settings
Return to the main interface of power management. Click【Send】 to send the control instructions to asynchronous card. Now The configuration of power management has been finished.
Send the instructions of timing control of power to the card