.jpg)
Let's start with the steps of the novastar software.
1. Run NovaLCT-Mars, move the cursor over the Advanced User Login (A) and click the icon.
2. Login with the password “admin”.
3. Then click Calibration icon.
4. Select the tabs Manage Coefficients , then select Chroma or Brightness on the left-bottom of the interface.
5. Select adjust coefficients (color is uniform on screen)
6. Select areas which need to be adjusted: select Screen, Pixel , Topology or List or Select Area On Screen ， and then select the cabinet which needs to
be adjusted by taking the example of the topological graph.
7. Click the cabinet （1，1）as following picture, the chosen area would turn into yellow.
8. Please click the cabinet （1，1） to adjust the internal module of the cabinet.
1) Input the actual resolution of the module in the popped interface.
2) Choose the module which needs to be adjusted, and the chosen area will turn into yellow.
9. How to select the adjustment type:
If Adjust Own Effect option is selected, the color of selected adjustment area is different from other areas.
If Effect As Other Selected Area option is selected, the color of the selected area will be adjusted according to the color of reference areas. After the
adjustment operation, the selected area color will look similar with the color of reference areas.
Take the self-adjustment as an example：
10. Adjust R,G,B calibration coefficients manually as following:
Simple Adjustment: Pull the sliding blocks of Red\Green\Blue, and then the colors value would be changed.
11. After the simple adjustment is completed, click Next and Save.
12. Select Advanced for advanced Adjustment.
13. Adjust the values of each color manually.
14. Click Save for saving to hardware after adjustment finished.
Note: In case power-off happened, if miss save option step, adjustment data will lose. After completion of simple adjustment or advanced adjustment, click
Apply effect to other Area. If the user wants to apply the data to the other areas, need to choose the area which needs to be adjusted.
15. Click Apply ，click Save ， and save the correction coefficient data to hardware.
16. Click Ok to apply to other areas.
17. After whole process finished, please click Save.
If you have any other questions, please feel free to contact our online customer service or send the email to manager@eagerled.com , we will give you the most suitable solution for your request.
Ledcontrollercard.com is our online sales department and we serve our customers with the highest quality products and the best attitude. If you have a demand for LED products, please contact us.
This article was written by Chunmei.
.png)
